Thermotec PVC Pipe Sleeve
THERMOTEC CLOSED CELL EXPANSION JOINT PIPE SLEEVE
(AS/NZS3500.2 & AS2870 C5.6.4)
Thermotec Closed Cell Backing Expansion Joint Pipe Sleeve is manufactured from closed cell low density polyethylene foam. The product is manufactured in a range of sizes and has excellent compression and recovery properties.
Material: | Low density polyethylene closed cell foam |
Density: | 40-50kg/m3 nominal |
Service Temperature: | -40Cto + 90C |
Water Absorption: | <2% by volume after 28 days |
Compression Recovery: | Excellent – 95% |
Compression Deflection: | Excellent – >20.5KPa |
Compression Resistance: | Excellent – <335kPA |
Load Bearing: | No deterioration at 10kN |
Chemical Resistance: | Excellent – Resists most commercially used chemicals & acids |
Resistance to Hydrocarbons: | Excellent – Resistant to oils, diesel, petrol & most solvents |
Flexibility: | Excellent |
- Compatible with all PVC pipe sizes from 40mm to 150mm
- Easy & fast installation – readily cut on site
- Excellent compression resistance – proven joint filler / expansion joint material
- Used in de-bonding applications (full range of Rebar sizes)
- Offers protection to pipework from ground movement
- Available in 2 metre lengths or rolls
- Low moisture absorption
- Optimum wall thickness for application (nominal 6.5mm thick wall)
- Meets Green Building Council low VOC & zero ozone depleting substances
- Contains recycled materials
Thermotec Expansion Joint Pipe Sleeve is manufactured from closed cell low density polyethylene foam. The product is manufactured in a range of sizes and has excellent compression and recovery properties.
Made in Australia