Thermotec PVC Pipe Sleeve

pipe-sleeve-0615

Thermotec PVC Pipe Sleeve

THERMOTEC  CLOSED  CELL  EXPANSION  JOINT  PIPE  SLEEVE

(AS/NZS3500.2 & AS2870 C5.6.4)

Thermotec Closed Cell Backing Expansion Joint Pipe Sleeve is manufactured from closed cell low density polyethylene foam.  The product is manufactured in a range of sizes and has excellent compression and recovery properties.

Material: Low density polyethylene closed cell foam
Density: 40-50kg/m3 nominal
Service Temperature: -40Cto + 90C
Water Absorption: <2% by volume after 28 days
Compression Recovery: Excellent – 95%
Compression Deflection: Excellent – >20.5KPa
Compression Resistance: Excellent – <335kPA
Load Bearing: No deterioration at 10kN
Chemical Resistance: Excellent – Resists most commercially used chemicals & acids
Resistance to Hydrocarbons: Excellent – Resistant to oils, diesel, petrol & most solvents
Flexibility: Excellent

 

  • Compatible with all PVC pipe sizes from 40mm to 150mm
  • Easy & fast installation – readily cut on site
  • Excellent compression resistance – proven joint filler / expansion joint material
  • Used in de-bonding applications (full range of Rebar sizes)
  • Offers protection to pipework from ground movement
  • Available in 2 metre lengths or rolls
  • Low moisture absorption
  • Optimum wall thickness for application (nominal 6.5mm thick wall)
  • Meets Green Building Council low VOC & zero ozone depleting substances
  • Contains recycled materials

Thermotec Expansion Joint Pipe Sleeve is manufactured from closed cell low density polyethylene foam. The product is manufactured in a range of sizes and has excellent compression and recovery properties.

Made in Australia