|
|
Insuloft
Building Blanket |
| Installation |
  Tontine
Insuloft Building Batts and Rolls are safe and easy to install into
walls and ceilings. Batts and Rolls are supplied in two widths to suit
standard housing construction, this being 430mm widths for 450mm centres
and 580mm for 600mm centres. As the Batts or Rolls are safe and soft,
Tontine Insuloft Building Batts and Rolls are easily torn or cut with
a pair of industrial scissors or shears. Offcuts can be used to fill
corners, crevices and gaps, eliminating any waste. For ceilings, Insuloft
Building Batts and Rolls are installed by laying them on top of the
ceiling between the joists. A 50mm gap should be allowed around flue
pipes, ceiling fans, and recessed lights. In walls, the Batts or Rolls
are placed between the wall studs before the plaster is put in place.
If required, lightly staple or tape insulation into position.
| Product Description |
Tontine Insuloft Building Batts and Rolls are lightweight compressible
insulation material manufactured from thermally bonded polyester. Tontine
Insuloft Building Batts and Rolls will provide both thermal and acoustic
insulation, whilst requiring no special clothing or mask to be worn
during installation. The product is white in colour.
| Applications |
Insuloft Building Batts and Rolls have been designed to provide a safe
and efficient insulation for the Australian homeowner. Insuloft Building
Batts and Rolls are ideal for use in both walls and ceilings, and will
efficiently reduce energy costs to the house owner by keeping the house
warmer in winter and cooler in summer.
| Physical Properties |
|
Melting Point
|
250°C
|
|
Vapour Pressure
|
Not Applicable
|
|
Percent Volatiles
|
Nil
|
|
Specific Gravities
|
1.38
|
|
Flash Point
|
Not Applicable
|
|
Flammability
|
Complies with building code of Australia
|
|
Other Properties
|
Non-allergenic low irritant, resilient
|
|
Ingredients
|
Organic, Long chain synthetic polymer
|
|
Chemical Entity
|
Composed of Carbon-Hydrogen
|
|
Max. Service Temp
|
150°C
|
|
Alkalinity
|
pH 7.8 (pH 7.8 is neutral)
|
|
Moisture Absorption
|
Exposure to an atmosphere of 50'C & 95% RH for four days
gives a moisture absorption of less than 0.2% by volume.
|
For further information on this and all other products please contact us.
|
