NuWrap Pipe and Duct Insulation

	NuWrap 5 combines 25 mm convoluted acousitc foam with high performance 5kg/m2 loaded polymer barrier-foil faced.

For noisy pipes in buildings, NuWrap is the effective and easy-to-install solution. Also suitable for ducting and ventilation fans, it is supplied with 4Zero foil facing as standard.

Designed to meet the latest building codes, NuWrap is available in Rolls, as precut “Flat Packs” and as Pre-Fabricated Fittings or quick and easy installation.

NuWrap combines acoustic foam (flat or convoluted) laminated to NuWave 4Zero Barrier.

 

 

NuWrap 5

Reducing Pipe Noise in Buildings

The Problem-Noise from Waste Pipes Disturbes Residents in Buildings

One of the most common complaints in homes and multi-residential buildings concerns noise from the waste pipes when drainage occurs.
PVC and other pipes radiate noise into the ceiling or wall cavity that can disturb the quiet enjoyment of our homes, especially at night.

The Solution- NuWrap 5 Acoustic Laggin for Pipes

The Building Code of Australia now sets the standard for noise emissions from waste pipes in buildings.
NuWrap 5 forms the core of a quick and inexpensive system designed to meet these rigorous standards.

NuWrap 5 Specifications:
Sound rating:
STC/Rw 25 single wrap over PVC pipe
STC/Rw 30 with 1 x 10mm plasterboard
STC/Rw 45* with 1 x 10mm plasterboard + R1.5 Batt

*meets BCA requirements for habitable rooms. Test reports available on request.

Roll sizes 3 mtr x 1350mm wide.

Precut "Flat Pack" parts avaiable for all PVC pipe and fittings.

For further information on this and all other products please contact us.