The Ultimate Solution to
Too Hot or Too Cold...or Mold!
Ultra Thin High Performance
Protective Insulation & Mold Prevention Coating
Patented Technology
For residential & commercial buildings
Nansulate® HomeProtect Interior is a white, paintable, mold resistant coating which can be applied to interior walls, ceilings, attics, and floor boards to give added insulation benefit, without use of potentially harmful anti-fungal agents. Nansulate® Home Protect Interior can be tinted to your desired color.
Nansulate® HomeProtect ClearCoat is a translucent, paintable, mold resistant coating which can be applied to exterior and interior surfaces to give added insulation benefit, without use of potentially harmful anti-fungal agents. Clear Coat has twice the insulating ability as the Interior.
Save Energy with Nanotechnology
Why should I add insulation to my home?
Improving your home insulation system is one of the fastest and most cost-effective ways to increase energy efficiency and comfort in your home. By investing in proper home insulation and weatherization products, you can significantly reduce your heating costs and reduce your cooling costs.
The chart below shows the average percentage of energy usage in a home.
There are several advantages to adding insulation to your home:
Proper insulation reduces energy costs.
A well-insulated structure does not gain or lose heat as quickly as a poorly-insulated one, so it is easier to maintain a comfortable temperature.
The retention of conditioned air lowers the demand on the heating and cooling systems. This reduces operating costs and extends the life of the system.
Improving your home's insulating system is one of the fastest and most cost-effective ways to increase energy efficiency and comfort in your home.
Where should I add insulation?
Adding insulation in the areas shown below can help you save energy.
How can Nansulate® help?
Nansulate® is easy to apply yourself and can be sprayed, brushed or rolled on in a variety of places. It can also be painted over with a color paint. Nansulate® will help to provide a thermal insulation barrier (keeping heat in or out - depending on the season); and will also help with moisture control (controlling moisture passing through insulation and collecting in your home's structure). Nansulate® provides protection heat transfer, while also offering you a cost effective, do it yourself means of increasing your home's energy efficiency which will help lower fuel bills.
Click the thumbnail below to see how Nansulate® appears on pre-painted surfaces (used in these pictures as wall insulation and ceiling insulation). You will see that your original color will show through, with a slight sheen added.
Product Details
Nansulate® HomeProtect Interior
White, semi-gloss, tintable - for interior wall, ceilings, attics for insulation and mold resistance.
Average surface temperature difference when applied correctly is approx. 30° F for a three coat coverage. We say 'average' because the difference experienced increases or decreases accordingly with the amount of difference between the high and low temperatures.
Coverage Rate: One gallon covers approximately 150-175 sq ft of surface area with the recommended minimum three coats of Nansulate® required for thermal protection. Actual coverage rate may vary depending on surface texture.
Nansulate® HomeProtect ClearCoat
Translucent, can be painted over - for exterior or interior use on homes and commercial buildings for insulation and mold resistance.
Average surface temperature difference when applied correctly is approx. 60° F for a three coat coverage. We say 'average' because the difference experienced increases or decreases accordingly with the amount of difference between the high and low temperatures.
Coverage Rate: One gallon covers approximately 150-175 sq ft of surface area with the recommended minimum three coats of Nansulate® required for thermal protection. Actual coverage rate may vary depending on surface texture.
For further information click here or view a PowerPoint presentation (zip/1.26MB)
with information about the Nansulate products. |
